Replacing a dead outlet and rewiring a house from the panel out are both electrical work, and both are worth a call. We handle the full range of residential and commercial electrical jobs in Kuna, from a single tripped circuit to a complete service upgrade. Homeowners, landlords, and small businesses in the area call us when something stops working, when a panel can no longer carry the load, or when wiring that was put in decades ago needs to be brought up to current standards. We scope the job on the phone, confirm the price before anything is scheduled, and are available every day from 9 AM to 9:30 PM.
Call (208) 565-3289 to get started.
Homes in this area were wired in different decades, and it shows in the panels. A house built when a 100-amp service was considered plenty is now running appliances, lighting, and electronics that the original system was never designed for. That gap between what the wiring was built for and what it is being asked to do is behind a large share of the calls we take in a city like Kuna. We know what to look for, and we give you a plain answer on what needs to happen before any work begins.
Call us at (208) 565-3289 and we will walk through it with you.
Electrical pricing is not a flat rate applied to a category. What a job actually costs depends on what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change without additional work. A call about a dead outlet might resolve at the device itself, or it might trace back to a wiring fault two circuits away. A ceiling fan installation is straightforward when a switch leg is already there and a different job when it is not.
When you call, we ask about the symptoms and the property so we can scope the job accurately. You get the rate on the call, and we tell you what it covers before anything is scheduled. If a site assessment is needed to finalize the number on a larger job, we confirm that before the visit and settle the price before work begins. There is no estimate handed over after the fact.
What tends to move a quote is the condition of the existing system. Older wiring, an undersized panel, or circuits that were added without documentation all affect how a job has to be approached. We explain what we find and what it means for the scope, so you are making an informed decision rather than agreeing to something open-ended.
Homes built with aluminum branch-circuit wiring have connections that loosen over time as the metal expands and contracts. The risk is not the wire itself but what happens at every outlet, switch, and junction where aluminum meets a copper device. Remediation involves treating each connection point with an approved method rather than swapping individual devices and calling it done. We identify aluminum wiring during inspections and explain the full scope before anything is touched.
A panel where half the breakers are labeled "misc" or left blank is not just inconvenient. It slows down every repair call and makes it harder to add circuits safely. We trace each circuit, test it under load, and label the panel accurately. For older properties where circuits were added over time without documentation, this work often turns up surprises worth knowing about before they become a problem.
Grounding and bonding are what keep a fault from becoming a hazard. Older homes frequently have outlets that are wired without a ground, panels where the bonding is incomplete, or grounding electrodes that do not meet current requirements. We check the system, identify what is missing, and correct it. This work often comes up during a safety inspection or as part of a larger panel project.
A generator that is plugged directly into the house without a transfer switch is a backfeed hazard. The transfer switch is what isolates your home's wiring from the utility line while the generator runs, and it is the piece that makes the hookup safe and code-compliant. We install manual and automatic transfer switches, run the circuit from the panel to the generator connection, and confirm which loads the generator will carry. In a region where winter storms can take out power for days at a stretch, this is work worth doing before the next outage.
Battery-operated detectors are a starting point, not a complete solution. Hardwired smoke and CO alarms are interconnected, so when one triggers they all sound. We run the wiring, connect the devices to a dedicated circuit, and confirm the system is functioning before we leave. For rental properties, hardwired detectors are often a code requirement, and we confirm what applies at the address before the work is scoped.
Outdoor lighting has to be wired with materials rated for exposure, connected to circuits that are GFCI-protected where required, and mounted to boxes that can handle the load and the weather. We install security lights, motion sensor fixtures, and landscape lighting runs, and we run the circuit from the panel when no outdoor circuit exists. The result is lighting that works reliably and is wired to stay that way.
Booking a visit starts with the call. We confirm availability, scope the job, and set the price before anything is locked in. For jobs that need a site assessment first, we schedule that as the first step and settle the final number before any work begins.
For situations that will not wait, we take short-notice calls based on what the current schedule allows. A panel that is buzzing, an outlet that smells hot, or a breaker that will not hold after being cleared are all reasons to call without delay rather than waiting for a convenient slot. Describe what you are seeing when you call and we will assess how urgently it needs to be handled.
Rental properties and businesses that need to stay operational get the same scheduling conversation. We work through what the property needs, confirm whether circuits or sections can be isolated so the rest of the building stays live, and plan the visit around what the situation requires. The goal is to get the work done without making the disruption larger than it has to be.
Older homes in a city like Kuna were built to the standards of their time, and those standards have changed considerably. Knob-and-tube wiring, which runs individual conductors through open air and ceramic insulators, was common before modern sheathed cable became the norm. It is not grounded, it cannot be covered with insulation without creating a heat problem, and it cannot be safely extended to serve modern loads. Where it is still present and still active, replacement is the right path.
Aluminum branch-circuit wiring shows up in a different generation of homes and carries its own set of concerns. Panels from the same era often have breakers that are no longer available for replacement, or that have been operating past their reliable service life. An inspection tells you what is there and what condition it is in, which is the starting point for any decision about repair versus replacement.
Not everything old needs to come out. Wiring that is in good condition, properly protected, and not being asked to carry more than it was designed for can often be left in place while problem areas are addressed. The distinction matters because a full rewire is a significant project, and a targeted repair or partial replacement is sometimes the right answer. We give you a plain read on which situation you are in after we have looked at the system, not before.
Electrical work done without permits, done by someone who was not working to code, or done by a previous owner who knew just enough to be dangerous turns up regularly in older homes. The signs vary. A junction box buried in a wall without a cover, a circuit that shares a neutral in a way that creates a shock risk, or a subpanel added without proper bonding are all things we have seen. None of them are cause for alarm before we know what we are actually dealing with.
We assess the work, identify what is safe to leave, and explain what has to be corrected and why. The goal is not to redo everything someone else touched. It is to make sure the system as a whole is sound.
Permit requirements depend on the scope of the work and sometimes on whether the property is in the city limits or in the county. We confirm what applies at your address before the work is scoped, and the permit is handled where one is required. Permitted work is inspected, and that inspection is a record that the job was done to code. For a property that will eventually sell, that record matters.
We serve Kuna and the surrounding communities across Ada County, including Meridian, Boise City, Eagle, Garden City, and Nampa.
If your property is outside Kuna proper, call us at (208) 565-3289 and we will confirm whether the address falls within our service area.
Coverage extends across the county, and most calls from the surrounding area are within our range. What each job covers is written out on our full list of electrical services.
Homes built before modern electrical standards became the norm often have panels sized for a much lighter load than a typical household now draws, wiring without a proper ground, and circuits added over time without documentation. Knob-and-tube and aluminum branch-circuit wiring both turn up in houses of a certain age, and each requires a different approach. An inspection tells you what is present and what condition it is in before any decisions are made.
If we find a problem while working on something else, we let you know before doing anything about it. You get a description of what was found and what it would take to address it, and you decide whether to add it to the current visit or schedule it separately. We do not expand the scope of a job without your agreement.
Incorrect panel labeling means the breaker that controls a given outlet, switch, or fixture is not identified accurately, which complicates any future repair or circuit work. We label circuits as part of panel work, and if we find a panel with missing or wrong labels during a repair visit, we note it and can correct it as part of the same job.
We work through findings in order of safety concern first, then code compliance, then convenience. Anything that presents an active risk gets flagged as the priority. Items that are out of date but not immediately dangerous are documented separately so you can address them on a timeline that makes sense for your budget and schedule.
Yes. Landlords and property managers call us for the same range of work as homeowners, including outlet and switch repairs, panel assessments, hardwired smoke and CO alarm installation, and wiring corrections that come up during tenant turnover or maintenance. We scope the job on the call and confirm the price before scheduling, which makes it straightforward to plan around a property that has tenants in it.
We work with property managers the same way we work with any other contact: scope the job on the call, confirm the price, and schedule the visit. If the property manager needs to coordinate tenant access or provide entry, we work around their process. The key is having the scope and the access details settled before the visit so the work can proceed without delays on the day.
Adding a circuit to a detached garage, a shop, or an outbuilding starts with a load calculation and a check of the main panel's available capacity. If the panel has room, the circuit can be run without a panel upgrade. If it does not, a subpanel or service upgrade becomes part of the conversation. We confirm which situation applies before any work is scoped, so you know what the project actually involves before committing to it.
Clear access to the panel is needed before any panel work can start. If the panel is blocked on the day of the visit, the work cannot proceed until access is available. We mention this when scheduling so you have time to clear the area before the visit. It avoids a wasted trip and keeps the job on schedule.
Rough-in is the phase where wiring is run through walls, ceilings, and floors before the surfaces are closed up. Trim-out is the later phase where outlets, switches, fixtures, and cover plates are installed after the walls are finished. The two phases are typically separated by the work of other trades, and we coordinate around that schedule so the electrical is ready when each phase needs to happen.
Whether a cable run to a detached structure needs to be buried depends on the installation method and local requirements. Underground runs use direct-burial cable or conduit at the required depth. Overhead runs are another option in some situations. We confirm which approach applies at your property before the work is scoped.
Call (208) 565-3289 any day between 9 AM and 9:30 PM.
We scope the job on the call, give you the rate before anything is scheduled, and confirm the price before the first wire is touched. Whether the job is a single outlet or a full panel upgrade, the number is agreed before we begin.
Pick the date. We do the wiring. We clean up after.
Browse our complete list of towns. Towns a short way out: Meridian, Boise City, Eagle.
Whether you are dealing with a tripped breaker that will not reset, an outlet that has stopped working, or a panel that cannot keep up with your home's demand, we cover the full range of residential and commercial electrical work in Kuna and the surrounding Ada County area. The table below breaks down what each service involves, who it fits best, and what is practical to know before you call. Every job is scoped on the phone so you have a price before anything is scheduled.
| Service Type | What It Covers | Common Situations | Good to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgradesService entrance workLoad calculationSubpanel installation | Older homes adding appliances, EV chargers, or electric heating | Permit and inspection requirements apply to panel and service work. We confirm what is required at your address before scheduling. |
| Electrical Repairs & Troubleshooting | Flickering or dead lightsDead or warm outletsTripping breakersBurning smells traced to source | Any homeowner, landlord, or business with an active electrical symptom | We trace the fault before replacing anything, so you are not paying for parts that were not the problem. |
| Electrical Safety Inspections | Panel and breaker conditionGrounding and bonding checkGFCI and AFCI coverage reviewWritten findings | Home buyers, sellers, landlords, and owners of older homes | An inspection documents what is there, what meets current standards, and what should be addressed. Findings are written up after the visit. |
Call us at (208) 565-3289 any day between 9:00 AM and 9:30 PM to get a price and talk through what the job involves.
(208) 565-3289