Meridian is a large city with a wide mix of housing and commercial property, and the electrical work that comes out of it reflects that. Homeowners in newer subdivisions call about adding circuits, upgrading panels, or getting an EV charger wired before the car arrives. Landlords managing rental properties call when a tenant reports a dead outlet or a breaker that will not reset. Businesses and property managers call when a build-out needs new circuits or a commercial space needs lighting work done without shutting down operations. Whatever the situation, we scope the job on the phone and give you a price before anything is scheduled.
Call (208) 565-3289 any day between 9 AM and 9:30 PM.
We cover Meridian across all property types, and the work runs from a single GFCI outlet in a bathroom to a full service upgrade at a commercial building. We handle the full range of residential and commercial electrical work here, and the process is the same regardless of the job size: you describe what is happening, we tell you what the visit involves, and the price is confirmed before we book.
Getting on the schedule starts with a phone call. We ask about the symptom, the property type, and what you already know about the system. From there we confirm the price and set the visit. For straightforward jobs, that conversation takes a few minutes. For larger work like a panel upgrade or a rewire, we may need to talk through the scope in more detail before a number is settled, but the price is always confirmed before the visit is booked.
Some situations in Meridian cannot wait for a standard appointment window. A sparking outlet, a panel that is making noise, a burning smell inside a wall, or a breaker that will not hold on a circuit that is not obviously overloaded are all reasons to call the same day. We take urgent calls within our hours, every day from 9 AM to 9:30 PM, and we assess on the call what the fastest available scheduling option looks like.
For tenants and businesses that need to stay operational, we talk through the scope before the visit so you know which circuits will be de-energized and for how long. A business that needs to keep part of its space running while we work on another section gets that conversation up front, not on the day. The person who answers the phone can tell you what the visit involves.
When electrical work is done without a clear record, the next person who touches the system is working blind. That matters most when a property changes hands or a tenant moves out and a new one moves in. An outlet that was added without being labeled in the panel, a circuit that was extended without a load calculation, or a junction buried in a wall without documentation creates problems that show up later, sometimes during an inspection, sometimes during a sale, sometimes when something fails.
When we finish a job, we test every outlet, switch, and circuit we worked on. GFCI and AFCI devices are tested for trip and reset function. Panel breakers are checked for correct seating and proper labeling. Where the work involved new circuits, we confirm the load is distributed correctly and that the panel can carry it without being pushed past its capacity.
For landlords in Meridian, a documented system means a tenant complaint about a dead outlet does not turn into a guessing game. For homeowners preparing to sell, an inspection that turns up unlabeled circuits or ungrounded outlets is a negotiating problem. We take pride in the electrical work we leave behind, and part of that is making sure the next person who opens the panel can read it.
Electrical pricing is based on what the job actually involves, and the only way to give you an accurate number is to understand the scope. When you call, we ask about the symptoms, the property type, and what you already know about the system. You get the rate on the call, and we confirm what it covers before anything is scheduled.
Three things tend to move a quote. The first is what the fault turns out to be once we trace it: a dead outlet that traces to a tripped GFCI upstream is a different job from one that traces to a wiring fault in the wall. The second is what has to be opened up to reach it. Wiring that runs through finished walls takes more time than wiring that runs through an unfinished basement. The third is whether the existing circuit or panel can carry the change. Adding a dedicated circuit for a dryer is straightforward if the panel has capacity. If it does not, the panel work becomes part of the conversation.
For larger projects in Meridian, including panel upgrades, rewiring, or EV charger installation, a site assessment may be needed before the final price is set. Either way, the price is confirmed before we schedule.
It depends on what was done and how it was done. Work that was wired correctly but not permitted can often be inspected and brought into compliance without being redone. Work that was wired incorrectly, whether by a previous occupant, an unlicensed handyman, or a contractor who cut corners, has to be evaluated on its own terms.
When we find work that raises questions, we trace it back to understand what it connects to, what it is feeding, and whether the wiring method and materials are appropriate for the load. A junction that was made in a wall cavity without a box, a circuit that was extended with the wrong wire gauge, or a panel that was modified without proper breaker sizing are all correctable, but they each have to be corrected correctly, not patched.
We tell you what we found, what it means, and what it takes to fix it. We do not make a drama of it. Some of what we find is a quick correction. Some of it is a more involved repair that changes the scope of the original call. Either way, you get a plain answer on what needs to happen before any additional work is agreed to.
A large city with a mix of newer construction and older housing generates a specific set of electrical needs. The jobs below come up regularly across homes, rentals, and commercial properties here, and each one has a situation behind it that is worth understanding before you call.
Battery-operated alarms get replaced when the battery dies and sometimes not again for years. Hardwired alarms with battery backup stay active even during a power outage and are interconnected, so when one sounds, they all sound. For rental properties in Meridian, hardwired interconnected alarms are the standard that holds up under scrutiny. We run the wiring, install the devices, and test the interconnect before we leave.
Older housing in Ada County sometimes still has knob-and-tube wiring in the walls. It does not support a grounded system, it cannot be safely extended, and it is not compatible with modern insulation. Whether it needs to come out depends on its condition and what the home's current electrical demands require, but it is not a system that can be patched indefinitely. We assess what is there and explain the replacement scope before any work is agreed to.
Ground-fault and arc-fault protection are required in specific locations, and older homes frequently have neither. A kitchen circuit without GFCI protection, a bathroom outlet that is not ground-fault protected, or a bedroom circuit without arc-fault protection are all gaps that show up during inspections and during sales. We install GFCI and AFCI outlets and breakers where they are needed and test each one before the visit closes.
An exterior outlet that is not properly enclosed is a problem waiting for the first wet season. In-use covers and weatherproof enclosures keep moisture out of the connection even when a cord is plugged in. For Meridian properties with outdoor kitchens, detached garages, or exterior equipment, we run the circuit, install the outlet with the correct enclosure, and protect it with GFCI protection as required.
On a renovation or build-out, the electrician needs to be on site before the walls close. Wiring that has to run through finished drywall costs more and takes longer than wiring that runs through open framing. When the electrical rough-in is not scheduled before the insulation and drywall go up, the project either waits or pays for the wall to be opened again.
For commercial build-outs in Meridian, the same principle applies to ceiling work. Recessed lighting, LED fixture runs, and the circuits that feed them all need to be roughed in before the ceiling grid goes up. We coordinate with general contractors and project managers to confirm when the electrical work needs to happen relative to the other trades, and we show up ready to wire when the framing is ready.
For additions and extensions on residential properties, the question is usually whether the existing panel can carry the new load. We run a load calculation before the rough-in starts so the panel question is answered before the framing is done, not after.
We cover Meridian and the surrounding Ada County area, including Kuna, Eagle, Garden City, and Star.
If your property is outside Meridian proper, call us at (208) 565-3289 and we will confirm whether the address falls within our service area.
We work across all property types in this area: single-family homes, condos, rental properties, small commercial buildings, offices, and retail spaces. The process is the same regardless of where in the county the property sits or what kind of building it is. See our electrical services page for how the work is handled.
If a fault traces back to wiring that is not accessible, we assess the best path to reach it without unnecessary damage. That might mean working through an existing access point, pulling a short section of wall, or approaching the problem from a different point in the circuit. We explain the options and the tradeoffs before any wall is opened.
We plan the shutdown scope before the visit so you know how long the power will be off and to which circuits. If the work takes longer than expected, we communicate that before the window closes rather than after. For jobs where a longer outage would be disruptive, we discuss sequencing options on the call so the plan accounts for your situation.
It depends on the wiring type, its condition, and whether it was installed correctly in the first place. We inspect what is there before committing to reusing it. Exterior wiring that is not rated for outdoor use, is not properly protected, or shows signs of damage is not something we build on, and we explain why before proposing an alternative.
Newer construction in a large city like Meridian tends to generate calls about panel capacity rather than failing wiring. Homes built for a standard residential load are now being asked to carry EV chargers, electric ranges, and home office circuits simultaneously, and the panel is often the limiting factor. We run a load calculation on the call to help you understand whether the panel can carry what you want to add or whether an upgrade is the right first step.
Yes. If a landlord, a property manager, or an insurer needs documentation of the work, tell us at the time of scheduling and we will confirm the best way to get that to the right person. We handle the coordination so you are not chasing paperwork after the fact.
Any equipment connected to circuits fed by the panel will lose power during panel work. If you have equipment that cannot tolerate an unplanned shutdown, let us know when we scope the job and we will factor that into how the work is sequenced. We confirm the shutdown scope before the visit so you can save work, shut down servers, or make other arrangements in advance.
Yes, in a few specific ways. A larger build-out typically involves more circuits, a higher total load, and more coordination with other trades around the rough-in schedule. For commercial work, we confirm the load requirements, the panel capacity, and the sequencing with the general contractor before the visit is booked, so the electrical side does not become the thing that holds up the rest of the project.
A load calculation adds up everything the electrical system is expected to power at once: lighting, outlets, appliances, heating and cooling circuits, EV chargers, and anything else drawing current. The goal is to confirm that the panel and service entrance can carry the combined demand without running at the edge of their rated capacity. If the total load is close to or over what the current service supports, we flag that before specifying any new circuits or equipment.
Electrical problems in Meridian do not improve on their own.
A breaker that keeps tripping, an outlet that stopped working, a panel that is running out of capacity, or wiring that has not been looked at in decades all have a clear solution: call (208) 565-3289 between 9 AM and 9:30 PM, describe what you are seeing, and get a price before anything is scheduled.
Pick the date. We do the wiring. We clean up after.
The work is done properly and left tidy. That is what we show up to do.
View our complete list of towns. Close by, we also take electrical work in: Kuna, Eagle, Boise City.
Whether you are dealing with a tripped breaker that will not reset, an outlet that has stopped working, or a panel that cannot keep up with your home's demand, we cover the full range of residential and commercial electrical work in Meridian and the surrounding Ada County area. The table below breaks down what each service involves, who it fits best, and what is practical to know before you call. Every job is scoped on the phone so you have a price before anything is scheduled.
| Service Type | What It Covers | Common Situations | Good to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgradesService entrance workLoad calculationSubpanel installation | Older homes adding appliances, EV chargers, or electric heating | Permit and inspection requirements apply to panel and service work. We confirm what is required at your address before scheduling. |
| Ceiling Fan Installation | Fan and fixture swapBox upgrade for fan supportNew wiring where neededHomes and commercial spaces | Homeowners replacing a light fixture with a fan, or adding a fan where none existed | If the existing ceiling box is not rated for a fan, we upgrade it at the same visit before the fan goes up. |
| Breaker & Fuse Repair | Breaker replacementFuse panel assessmentCircuit testingLoad verification | Homes with repeatedly tripping breakers or an aging fuse box | A breaker that trips under normal load often signals a wiring fault or an overloaded circuit, not just a worn breaker. |
Call us at (208) 565-3289 any day between 9:00 AM and 9:30 PM to get a price and talk through what the job involves.
(208) 565-3289